Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Numerical Study of a High Temperature Latent Heat Storage (200-300oC) Using Eutectic Nitrate Salt of Sodium Nitrate and Potassium Nitrate

C.W. Foong, J.E. Hustad, J. Løvseth, and O.J. Nydal
Department of Energy and Process Engineering, Norwegian University of Science and Technology, Trondheim, Norway

In this study, a small scale direct solar thermal energy storage system with secondary reflector is designed and developed. The main advantage of thermal energy storage is that cooking can be carried out during the time when there is little or no sun shine. In addition, no heat transport fluid is needed in this system. A well insulated heat storage should keep the heat for about 24 hours. KNO3 ...

On The Modelling Of Electrowetting Using COMSOL Multiphysics

J.F. Dannenberg, J. Brinkert, and E.A.D. Lamers
Reden b.v., Hengelo (ov.), The Netherlands

One of the upcoming technologies in displays is that of the electrowetting displays. A surface can be covered by a colored oil or transparent water using a voltage to increase or decrease the wettability of the surface. A simulation of the behavior of such a thin film of oil in water, forced to move due an electrostatic field, has been made using the level-set, two-phase flow application mode ...

Modeling of Laser Processing For Advanced Silicon Solar Cells

G. Poulain[1], D. Blanc[1], A. Kaminski[1], B. Semmache[2], and M. Lemiti[1]
[1]Université de Lyon: Institut des Nanotechnologies de Lyon INL, CNRS, INSA de Lyon, Villeurbanne, France
[2]SEMCO Eng., Montpellier Cedex 5 - France

Silicon solar cells still require cost reduction and improved efficiency to become more competitive. New architectures can provide a significant increase in efficiency, but today most of the approaches need additional processing steps. In this context, laser processing offers a unique way to replace technological steps like photolithography that is not compatible with the requirements of the ...

Effective Thermal Conductivity of Composite: Numerical and Experimental Study

M. Karkri
Université Paris-Est, CERTES, Créteil Cedex, France

In this paper, thermal properties of composites are investigated numerically and experimentally. In the numerical study, finite-elements method in COMSOL is used to modelize heat transfer and to calculate the Effective Thermal Conductivity (ETC) of the composite for three elementary cells, such as simple cubic (SC), body centered cubic (BCC) and face centered cubic (FCC). The effect of the ...

Ultrasound Piezo-Disk Transducer Model For Material Parameter Optimization

L. Spicci, and M. Cati
Esaote SpA, Florence, Italy

The technology involved in high performance ultrasound imaging probes needs a reliable model to help in new projects development and performance simulations. To achieve a useful model, it is necessary to use correct values for all material parameters involved in the electro-acoustical performances of the piezoelectric material, but unfortunately some of these parameters are known only with high ...

Modelling Flow through Fractures in Porous Media

E. Holzbecher[1], W.L. Wah[1], and M-S. Litz[2]
[1]Georg-August Universität Göttingen, Germany
[2]Freie Universität Berlin, Germany

There are various alternative options concerning modeling fluid flow within fractures in porous media. We give a general overview, with remarks concerning the modeling using COMSOL Multiphysics. Moreover we define and study two test cases for intercomparison. Finally for one of the testcases some results of an extensive sensitivity study is presented.

Parametric Model Of An Air-Core Measuring Transformer

D. Herceg
Faculty of Technical Science, Novi Sad, Serbia

Power grid voltages and currents may be distorted due to presence of harmonics. Measurements of such voltage with harmonics may be performed using newly developed instrument with a small air-core transformer based probe as the input unit. The probe must be shielded against unknown external electromagnetic fields. At the same time, the probe must remain linear throughout the range of frequencies. ...

3D Electromagnetic Field Simulation in Microwave Ovens: A Tool to Control Thermal Runaway

T. Santos[1], L.C. Costa[1,2], M. Valente[1,2], J. Monteiro[1,2], and J. Sousa[3]
[1]University of Aveiro, Portugal
[2]I3N, Aveiro, Portugal
[3]TEKA Portugal S.A., Ílhavo, Portugal

In microwave heating applications, the energy is introduced directly into the volume of the material and as consequence the quality of the process is highly dependent on the uniformity of the electromagnetic field distribution along it. That is, the non uniformity of the heating is a potential problem with serious consequences. Thermal runaway is the most critical, in materials with temperature ...

Design Of Acoustic Metamaterials Based On The Concept Of Dual Transmission Line

A-S.Moreau[1], H.Lissek[1], and F. Bongard[2]
[1]Ecole Polytechnique Fédérale de Lausanne, Switzerland
[2]JAST SA, Antenna Systems, Lausanne, Switzerland

In this context, a one-dimensional acoustic transmission line, exhibiting metamaterial properties, is presented. It is composed of an acoustic waveguide, periodically loaded with membranes having the function of series capacitances, as well as transversally connected open channels (denoted stubs) having the function of shunt inductances. A validation of the transmission line design is made ...

Material Flow around a Bobbin Tool for Friction Stir Welding

J. Hilgert, L. Hütsch, J. Dos Santos, and N. Huber
GKSS Forschungszentrum GmbH, Geesthacht, Schleswig-Holstein, Germany

This study presents an approach to model the material flow around a bobbin tool for Friction Stir Welding (FSW). In this CFD model the aluminum is treated as a highly viscous non Newtonian shear thinning liquid. The model is formulated in a 3D Eulerian frame. The temperature field and the desired torque acting on the tool are taken from a 3D thermal pseudo mechanical model implemented in ...

1 - 10 of 185 First | < Previous | Next > | Last