Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Periodic mesh

Posted Feb 11, 2012, 9:07 p.m. EST Mesh Version 3.5a 1 Reply

Romain Corcolle
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

I would like to generate a periodic mesh on a square geometry. Indeed, I apply periodic bounday conditions but I obtain some strange behavior close to the boundaries (even with a very fine mesh). I guess it comes from the mesh which is not periodic.
Here is a picture from what I get: dl.free.fr/tqq8HVFqH
Is it possible to get a periodic mesh?

Best regards,
1 Reply Last Post Feb 12, 2012, 6:27 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 12, 2012, 6:27 a.m. EST
Hi
in V4.2a you have an interesting copy and mirror mesh feature, nothing like that in 3.5a

--
Good luck
Ivar
Hi in V4.2a you have an interesting copy and mirror mesh feature, nothing like that in 3.5a -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content