COMSOL Day Austria (Online)

July 1, 2020 7:45 AM - 4:30 PM CEST

View All COMSOL Day Locations

Join us and register for the COMSOL Day Austria online event.

We invite you to a day of multiphysics modeling training, inspiring practical presentations and discussions – from your office or home office.

Expect inspiring keynote talks and discussions, as well as interesting COMSOL presentations on modeling techniques for various industry and research areas. You can ask questions at any time and the speakers will be happy to answer them.

In the Tech Cafés, you become active yourself and exchange ideas with colleagues and COMSOL engineers about your simulation projects and discuss things you've always wanted to talk about. You are welcome to prepare yourself for this! Specific questions about licensing options or modeling issues that you'd rather discuss privately with COMSOL staff can be addressed in one-to-one meetings at any time during COMSOL Day.

Schedule

7:45 am
Registration
8:00 am

Learn the fundamental workflow of COMSOL Multiphysics®. This introductory demonstration will show you all of the key modeling steps, including geometry creation, setting up physics, meshing, solving, and postprocessing.

8:30 am
Welcoming Remarks
8:45 am

See how you can deploy the power of high-fidelity simulation to engineers, designers, operators, and scientists throughout your organization.

9:00 am

Multiphysics Simulation for Optimization of Piezoelectric Transducers and Micro-/Nanoimprint Processes

I will give you insight into how COMSOL Multiphysics® helps us optimize the design and properties of piezoelectric transducers for sensing and energy harvesting in different use cases. You will also learn how we apply microfluidic simulations to improve roll-to-roll micro- and nanoimprint processes for functional surfaces.

9:30 am

Design Optimization of a PZT MEMS 1D Micromirror for High-Resolution Displays

Micromirrors can be used in many fields, including light detection and ranging (lidar) systems for the automotive industry or biology for endoscopic bioimaging. Compared to well-established electrostatic and magnetic micromirrors, piezoelectric micromirrors can offer better electric power efficiency and better miniaturization abilities. In this work, we optimized a piezoelectrically actuated silicon-based MEMS micromirror for high-resolution displays. Our design relies on a previous device from Baran et al. [1] and is specifically optimized to increase its optical scan angle (θopt) and reduce its power consumption compared to the original design.

[1] U. Baran, S. Holmstrom, D. Brown, W. Davis, O. Cakmak, and H. Urey, "Resonant PZT MEMS scanners with integrated angle sensors", Optical MEMS and Nanophotonics (OMN), IEEE, pp. 99–100, 2014.

10:00 am
Q&A
10:15 am
Parallel Sessions
MEMS

Get a brief overview of the COMSOL Multiphysics® software, with a focus on the field of microelectromechanical systems (MEMS).

Multiphysics with Structural Analysis

Learn how to model linear and nonlinear material behaviors; fluid-, acoustic-, and thermal-structural interactions; MEMS applications; and more.

Tech Café: CFD

Computational fluid dynamics (CFD) simulations are used in numerous fields of industry and research. This Tech Café is your platform to discuss and exchange experiences with colleagues and COMSOL engineers on issues such as turbulence models, flow regimes, and multiphase flows.

11:00 am
Parallel Sessions
Piezoelectric Devices

Learn about the modeling tools available in COMSOL Multiphysics® to simulate piezoelectric devices such as transducers, actuators, and harvesters. We will go over the modeling steps required for piezoelectric simulations and multiphysics couplings such as coupling with pressure acoustics as well as coupling with fluid flow and electrical circuits.

Low-Frequency Electromagnetics

Learn about the capabilities of the AC/DC Module for modeling Maxwell's equations in the low-frequency regime. Use cases include resistive and capacitive devices, inductors and coils, as well as motors and magnets.

Tech Café: Structural Mechanics

Join COMSOL engineers and your colleagues at this Tech Café to discuss modeling structural mechanics using COMSOL Multiphysics®. You can also ask questions about specific applications involving multiphysics phenomena such as acoustic-structure interactions, fluid-structure interactions, thermal stresses, and more.

11:45 am
Break for Lunch
12:15 pm
Parallel Sessions
Optics & Photonics

Learn about using the Ray Optics Module and Wave Optics Module for optics and photonics applications.

Optimization and Product Design

Sensitivity analysis can be used to identify important parameters that can then be changed manually or automatically using optimization. Optimization of these parameters enhances the performance of your product. In the case of manufacturing uncertainties, it is possible to compute several objectives and optimize for the worst of them. You will see several examples of how optimization can be set up in the COMSOL® user interface.

Tech Café: Heat Transfer

Probably no other physical quantity has such an important influence on so many different model parameters as temperature. Therefore, in this Tech Café, you can discuss with colleagues and COMSOL staff the simulation of heat transport by convection, conduction, and radiation, as well as the influence on other physical or chemical processes.

1:00 pm

Design of Metasurfaces

One can design optical components by engineering features with the same order of magnitude as the light wavelength. In this talk, we want to present strategies for how to design and simulate such structures. We will show examples of implementable structures and how to estimate and evaluate their optical performance.

1:30 pm

Design and Implementation of a Photonic Nanomechanical Interface Between Gigahertz and Telecom Frequencies

Transducers connecting different frequency regions are a hot topic in the current quantum information community due to their potential to enable long-distance quantum networks. While there are a variety of approaches to achieve such a frequency conversion, using a mechanical resonator has been proved to be the most efficient method so far. In this talk, we will show how we designed and optimized a nanomechanical resonator, which converts photons between an optomechanical cavity operating at infrared wavelength and a microwave resonator. Our integrated device excels in the high conversion efficiency and the required ultralow pump powers in the picowatt regime.

2:00 pm
Q&A
2:15 pm
Parallel Sessions
Introduction to COMSOL Multiphysics®, the Application Builder, and Deployment Products

Learn the fundamental workflow of the COMSOL Multiphysics® modeling environment. This introductory demonstration will show you the process of transforming models into specialized simulation applications and distributing them with COMSOL Compiler™ and COMSOL Server™, application deployment products.

Acoustics and Vibrations

Get an introduction to the capabilities of the COMSOL Multiphysics® software for modeling the interactions between acoustic waves and structural vibrations, including techniques for improving both model accuracy and runtime. Plus, learn about advanced postprocessing for acoustic waves.

Tech Café: Optics and Photonics

Different models and expressions are used by the COMSOL® software to define, analyze, and simulate optical phenomena and devices. These range from using general finite element methods, the beam envelope method, and formulations suited for ray optics. Join your colleagues in this Tech Café to discuss the applicability of these formulations to your applications and ask questions to COMSOL engineers knowledgeable in the field of optics.

3:00 pm
Parallel Sessions
High-Frequency Electromagnetics

Learn about the capabilities of the RF Module, Wave Optics Module, and Ray Optics Module for simulating high-frequency electromagnetic waves and rays. Topics include the analysis of microwave, photonics, and optical components including waveguides, antennas, lenses, and high-power laser systems. We will also address the coupling of electromagnetics simulations to other physics, such as heat transfer, including RF heating and STOP analysis.

Thermal Analysis

Get a brief overview of using the Heat Transfer Module within the COMSOL® software environment. We will discuss conjugate heat transfer with the combination of heat transfer in solids and heat transfer in fluids, including thermal radiation effects. These phenomena could also be coupled with structural mechanics, chemical reactions, and particle tracing.

Tech Café: Acoustics

If you are interested in analyzing sound quality, noise reduction performance, or acoustic sensors, this Tech Café is the session for you. Discuss acoustics modeling techniques with COMSOL engineers and fellow acoustics engineers.

3:45 pm
Parallel Sessions
Electromagnetic Heating

Learn how to model electromagnetic heating for low- and high-frequency electromagnetics applications. Important electromagnetic heating phenomena covered include Joule heating, induction heating, RF heating, and laser heating.

Battery and Fuel Cell Simulations

Get an overview of using the Batteries & Fuel Cells Module within the COMSOL® software environment for modeling batteries and fuel cells. Aspects related to the transport of ions and current, porous electrodes, and electrode reactions relevant to both applications will be covered. We will address the simulation of lithium-ion battery power and capacity using realistic vehicle drive cycles, modeling of thermal effects on both cell and pack levels, safety aspects, and modeling of capacity fade. In addition, you will get an introduction to different types of models, from low cost to high fidelity. We will discuss aspects related to parameters and parameterization for models, including the simulation of electrochemical impedance spectroscopy (EIS) data.

Tech Café: Electromagnetics

Join this Tech Café to discuss with COMSOL engineers and colleagues the simulation of electromagnetic phenomena in different frequency ranges and on different size scales. Get useful modeling ideas and ask your questions to the specialists.

4:30 pm
Concluding Remarks

COMSOL Speakers

Thorsten Koch
COMSOL
Thorsten Koch is the managing director of Comsol Multiphysics GmbH. There, he worked as an applications engineer and was a member of the development team. He holds degrees in physics and applied mathematics, completing his PhD studies on 3D contractility measurements of living cells at the University of Erlangen-Nuremberg.
Yvonne Krause
COMSOL
Yvonne Krause has been working as a technical sales engineer at Comsol Multiphysics GmbH since 2012. She received her diploma in geophysics from the Technical University of Berlin. After graduation, she worked in different research projects, using simulation to model electric fields and transport processes in geophysics.
Sarina Grevsmühl
COMSOL
Sarina Grevsmühl has worked as an applications engineer at Comsol Multiphysics GmbH since 2015. She earned a degree in physics from the University of Göttingen. For her diploma thesis, she electrically characterized and analyzed deep-level impurities, which form in iron-doped monocrystalline silicon after aluminum gettering.
Maria Iuga-Römer
COMSOL
Maria Iuga-Römer is an applications manager at Comsol Multiphysics GmbH. Previously, she studied physics at the West University of Timișoara and received a PhD at the University of Würzburg. She worked at the Fraunhofer Institute for Silicate Research, simulating microstructural properties to develop and optimize ceramic materials.
Serjoscha Hylla
COMSOL
Serjoscha Hylla is an applications engineer specializing in geometry creation, CAD import, and meshing. Before joining Comsol Multiphysics GmbH in 2014, he studied mechanical engineering at the University of Kassel.
Erik Bornhöft
COMSOL
Erik Bornhöft is regional sales manager and joined Comsol Multiphysics GmbH in 2010. He studied physics with a focus on fluid dynamics at the University of Göttingen. His thesis work at the DLR Göttingen involved experimental and numerical research into active control of supersonic flow.
Andreas Bick
COMSOL
Andreas Bick is an applications engineer at Comsol Multiphysics GmbH. He holds a PhD in physics from the University of Hamburg, where he studied ultracold quantum gases in noncubic optical lattices, hybrid quantum systems, optical resonators, and micromechanical systems.
Markus Birkenmeier
COMSOL
Markus Birkenmeier is an applications engineer who joined Comsol Multiphysics GmbH in 2016. Previously, he received his PhD from the Karlsruhe Institute of Technology, where he investigated the modeling of biochemical reaction networks.
Nancy Bannach
COMSOL
Nancy Bannach is a product developer for the Subsurface Flow and Heat Transfer modules. She joined COMSOL Multiphysics GmbH as a technical sales engineer and has worked with sales, support, and technical marketing. She studied geophysics in Göttingen, where she specialized in numerical simulations of convection in the earth's core.
Linus Andersson
COMSOL
Linus Andersson is an applications engineer providing technical support within COMSOL and to customers worldwide, specializing in electromagnetic and acoustic simulations. Linus joined COMSOL in 2003, after receiving his MS degree in engineering physics at the Royal Institute of Technology in Stockholm, and completing his diploma thesis at CERN.
Ad van der Linden
COMSOL
Ad van der Linden works as an applications engineer and joined Comsol Multiphysics GmbH in 2008. Prior, he studied applied physics at the Technical University Delft in the Netherlands. He has more than 20 years of experience in electromagnetic applications combined with numerical simulations.
Annette Pahl
COMSOL
Annette Pahl is an applications engineer at Comsol Multiphysics GmbH since 2012. She has studied food technology and chemistry and completed her doctorate on the characterization and numerical simulation of plasma sources at the University of Göttingen. She has worked in plasma diagnostics and modification for the HAWK in Göttingen.
Thomas Englisch
COMSOL
Thomas Englisch works as an account manager at Comsol Multiphysics GmbH. As a research assistant at the Bielefeld University of Applied Sciences, he dealt with numerical simulation in research and teaching. During his physics studies, he specialized in computer-oriented theoretical physics.
Jonas Inhestern
COMSOL
Jonas Inhestern works as a technical sales engineer at Comsol Multiphysics GmbH. Before he started working for COMSOL in 2014, he completed a degree in physics at the TU Berlin with a focus on applied physics.
Melanie Pfaffe
COMSOL
Melanie Pfaffe is an account manager at Comsol Multiphysics GmbH. In 2011, she earned her PhD from the Humboldt University of Berlin, where she studied computer-aided theoretical chemistry.
Friedrich Maier
COMSOL
Friedrich Maier is a technical sales engineer at Comsol Multiphysics GmbH, where he previously worked as an applications engineer. He studied geophysics at the University of Göttingen, where he also received his PhD in 2014. As a researcher, he focused on electromagnetic and physicochemical methods, investigating the properties of georeservoirs.

Join COMSOL Day Austria (Online)

This event has ended. Visit the event calendar to view upcoming events.

COMSOL Day Details

Location

This event will take place online.

Invited Speakers

Mag. Philipp Schäffner
MATERIALS Institute of JOANNEUM RESEARCH Forschungsgesellschaft mbH

Philipp Schäffner studied physics at the University of Graz and has been working at the MATERIALS Institute of JOANNEUM RESEARCH Forschungsgesellschaft mbH since 2011. His research activities have a strong focus on polymer-based flexible transducers and energy harvesters.

Dr. Adrien Piot
Silicon Austria Labs

A. Piot received a MSc degree in applied physics and engineering from the INSA Toulouse, Toulouse, France, in 2015 and a PhD degree in nano- and microtechnologies in 2018 at the Universite Paris-Saclay, Paris, France. From 2015 to 2018, he was a PhD student working on the transduction and fabrication study of a three-axis piezoelectric GaAs microgyroscope at the Center for Nanofabrication and Nanotechnology, Palaiseau, France, and at the ONERA, the French Aerospace Lab, Chatillon, France. Since 2018, he works as a researcher in the Microsystem Technologies department at Silicon Austria Labs, Villach, Austria. His current research interest is in piezo-MEMS design, microfabrication, and characterization.

Dr. Anderson Singulani
ams AG

Anderson Singulani has been a senior R&D engineer in the photonics and system group at ams AG since 2013. He holds a doctoral degree in microelectronics from the Technical University of Vienna and has been working since his studies on numerical methods, simulation, and the mathematical modeling of physical phenomena. He is specialized in the development of optical and photonic devices in the semiconductor industry.

Dr. Matthias Wulf
Institute of Science and Technology Austria

Matthias Wulf received a MSc degree in electrical engineering from the University of Kassel, Germany, in 2009. He obtained his PhD in nanophotonics at the FOM Institute AMOLF in Amsterdam, the Netherlands, with a research project focused on the investigation of the nonlinear effects occurring during the propagation of ultrashort pulses in nanoscale waveguides like photonic crystal waveguides and plasmonic nanowires. Since 2016, he has worked as a postdoctoral fellow in the quantum-integrated devices group at the Institute of Science and Technology in Klosterneuburg, Austria. His current research topic is the design, nanofabrication, and characterization of quantum transducers with the aim to convert quantum information between the gigahertz and telecom frequency regions.