How to Create Electrostatics Models with Wires, Surfaces, and Solids

Bjorn Sjodin August 8, 2017

The latest version of the AC/DC Module enables you to create electrostatics models that combine wires, surfaces, and solids. The technology is known as the boundary element method and can be used on its own or in combination with finite-element-method-based modeling. In this blog post, let’s see how the new functionality can be used to conveniently set up a model that includes a number of very thin spiral wires.

Read More

Bjorn Sjodin July 11, 2017

In a previous blog post, we looked at setting up a programmatic sequence of operations under the Study node for solving, saving a model to file, and exporting data to file. Today, we are building on this knowledge to show how an entire sequence of images can be automatically exported after solving a model in the COMSOL Multiphysics® software.

Read More

Categories

Bjorn Sjodin June 21, 2017

Little-known functionality of the Study node is its ability to perform a programmatic sequence of operations, including solving; saving the model to file; and generating and exporting plot groups, results, and images. In this blog post, we take a closer look at this capability. If you use the COMSOL Multiphysics® software, there is a good chance you will find this information useful in your modeling work.

Read More

Categories

Bjorn Sjodin June 20, 2017

You can generate and visualize randomized material data with specified statistical properties determined by a spectral density distribution by using the tools available under the Results node in the COMSOL Multiphysics® software. In this blog post, we show examples that are quite general and have potential uses in many application areas, including heat transfer, structural mechanics, subsurface flow, and more.

Read More

Bjorn Sjodin June 2, 2017

To easily generate random-looking geometric surfaces, the COMSOL Multiphysics® software provides a powerful set of built-in functions and operators, such as functions for uniform and Gaussian random distributions and a very useful sum operator. In this blog post, we show you how to generate a randomized surface with what amounts to a “one liner” expression with detailed control of the constituent spatial frequency components that determine the nature of the surface’s roughness.

Read More

Bjorn Sjodin February 2, 2016

Have you ever run a large parametric sweep overnight, only to discover the next morning that the parametric solver is still not finished? You may wish you could inspect the solutions for the parameters that are already computed while waiting for the last few parameters to converge. The remedy to this problem is to use a batch sweep, which automatically saves the parametric solutions that were already computed on a file that you can open for visualization and postprocessing purposes.

Read More

Bjorn Sjodin December 15, 2015

In version 5.2 of COMSOL Server™, you can now launch apps much faster and configure the browser to run only one dedicated app. The Application Libraries, available in both COMSOL Multiphysics and COMSOL Server™, have been significantly updated with lots of examples for you to use and get inspired by when creating your own apps.

Read More

Categories

Bjorn Sjodin December 8, 2015

In the Application Builder, included with COMSOL Multiphysics version 5.2, the new Editor Tools window makes it possible to create simulation apps with a lot fewer clicks of the mouse. In this blog post, we will demonstrate how to create an app with Editor Tools using a simple simulation example, as well as show how to perform common user interface creation tasks more easily.

Read More

Categories

Bjorn Sjodin January 23, 2015

How can you use an electric field to control the movement of electrically neutral particles? This may sound impossible, but in this blog entry, we will see that the phenomenon of dielectrophoresis (DEP) can do the trick. We will learn how DEP can be applied to particle separation and demonstrate a very easy-to-use biomedical simulation app that is created with the Application Builder and run with COMSOL Server™.

Read More

Bjorn Sjodin January 5, 2015

In 1977, the axion, a type of elementary particle, was suggested as a solution to a theoretical particle physics problem: the strong charge-parity (CP) problem. Later, it was discovered that the particle may actually be a component of dark matter. Many experiments are currently underway that have the goal of detecting axions. In this blog post, we’ll focus on the Axion Dark Matter eXperiment (ADMX), which uses a microwave cavity in an attempt to accomplish this goal.

Read More

Categories

Bjorn Sjodin November 11, 2014

In order to make it easy to get started with the Application Builder, we included a few example applications in the Application Libraries of COMSOL Multiphysics version 5.0. This blog post will give you an overview of the Tuning Fork application and the structural vibration model that it is based on.

Read More

Categories


Categories


Tags

1 2