Model Gallery

Next Step

Select product:

All products

 Showing result: 1 - 10 of 466
Structural Analysis Presentation, General Introduction, V 4.2aStructural Analysis Presentation, General Introduction, V 4.2a

This presentation gives an overview of the Structural Mechanics Module. The included model example performs a structural analysis of an elbow bracket of steel fixed at one end. The component is part of a support mechanism and is...

Continuous CastingContinuous Casting

This example models the casting process of a metal rod from melted to solid state using the Non-Isothermal Flow multiphysics interface, which combines heat transfer and fluid flow. The model describes the fluid and solid flow and heat...

Fluid-Structure InteractionFluid-Structure Interaction

This model demonstrates how to set up a fluid-structure interaction problem in COMSOL Multiphysics. It illustrates how fluid flow can deform solid structures and how to solve for the flow in a continuously deforming geometry. The...

Inductive Heating of a Copper CylinderInductive Heating of a Copper Cylinder

The induced currents in a copper cylinder produce heat that in turn change the electrical conductivity. This means that the field propagation has to be solved simultaneously with the heat transfer through the cylinder and surrounding...

Heat SinkHeat Sink

This model is intended as a first introduction to simulations of fluid flow and conjugate heat transfer. It shows you how to: Draw an air box around a device in order to model convective cooling in this box. Set a total heat flux on a...

Boiling WaterBoiling Water

Boiling flow is an example of phase transition initiated by raising the temperature of a liquid above its saturation temperature. It is possible to accomplish this in many ways; in this example by applying an external heat flux to a solid...

Plasmonic Wire GratingPlasmonic Wire Grating

A plane wave is incident on a wire grating on a dielectric substrate. Coefficients for refraction, specular reflection, and first order diffraction are all computed as functions of the angle of incidence. The model is set up for one...

Piezo-Acoustic TransducerPiezo-Acoustic Transducer

A piezoelectric transducer can be used either to transform an electric current to an acoustic pressure field or, the opposite, to produce an electric current from an acoustic field. These devices are generally useful for applications that...

Convection Cooking of Chicken PattiesConvection Cooking of Chicken Patties

When cooking food, such as a patty, in convection ovens there is a trade off in the heating method. If the patty is heated at a low oven temperature the cooking is slow and the patty dries out, resulting in a poor taste. If the patty is...

Porous Reactor with Injection NeedlePorous Reactor with Injection Needle

This model treats the flow field and species distribution in an experimental reactor for studies of heterogeneous catalysis. The model exemplifies the coupling of free and porous media flow in fixed bed reactors. The reactor consists...


1 2 3 4 5 6 7 8 9 10