Showcase

Next Step

Select solution area:

Showing result: 1 - 10 of 466
Acoustics of a MufflerAcoustics of a Muffler

This is a model of the pressure wave propagation in a muffler for a combustion engine. The approach is general for analysis of damping of propagation of harmonic pressure waves. The model shows how 3D acoustics can be modeled in fairly...

Transport and AdsorptionTransport and Adsorption

This model demonstrates how to model phenomena defined in different numbers of dimensions in a fully coupled manner using COMSOL Multiphysics. Whereas in most cases the reaction rate expression is defined as a function of the...

An Electrokinetic Valve in a Microchannel SystemAn Electrokinetic Valve in a Microchannel System

This model presents an example of pressure driven flow and electrophoresis in a microchannel system. The modeled device is often used as an electrokinetic sample injector in biochips with well-defined sample volumes of dissociated...

Electroosmotic Flow in Porous MediaElectroosmotic Flow in Porous Media

This example treats the modeling of electroosmotic flow in porous media. The system consists of a compartment of sintered porous material and two electrodes that generate an electric field. The cell combines pressure and electroosmotic...

Fuel Cell Bipolar PlateFuel Cell Bipolar Plate

A fuel cell stack operates at temperatures just below 100 °C, which means that it has to be heated at start-up. The fuel cell stack consists of unit cell of anode, membrane, and cathode connected in series through bipolar plates....

Helmholtz CoilHelmholtz Coil

A Helmholtz coil is a parallel pair of identical circular coils spaced one radius apart and wound so that the current flows through both coils in the same direction. This winding results in a uniform magnetic field between the coils with...

Microchannel CellMicrochannel Cell

This example was originally formulated by Albert Witarsa under Professor Bruce Finlayson’s supervision at the University of Washington in Seattle. It was part of a graduate course in which the assignment consisted of evaluating the...

Large Deformation BeamLarge Deformation Beam

This example studies the deflection of a cantilever beam undergoing very large deflections. In addition, a linearized buckling analysis of the structure is also performed. The model comes from Section 5.2 of NAFEMS Background to Finite...

Non-Isothermal Flow Around a Cooling DeviceNon-Isothermal Flow Around a Cooling Device

This model shows the application of COMSOL Multiphysics in the modeling of non-isothermal laminar flow of fluids (in this case a gas). The model assumes that the expansion work done by the gas is negligible, that the variations in...

Piezoelectric Shear-Actuated BeamPiezoelectric Shear-Actuated Beam

The model performs a static analysis on a piezoelectric actuator based on the movement of a cantilever beam, using the Piezoelectric Devices predefined multiphysics interface. Inspired by work done by V. Piefort and A. Benjeddou, it...


1 2 3 4 5 6 7 8 9 10