Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to attach a file in the discussion forum?

Muthuraman Chinnadurai

Please login with a confirmed email address before reporting spam

Hello,
Am new to comsol and would like to share my doubts in this support forum.
When i tried to attach a model on the add file option,it says that the file is not supported.
So Please help me how to attach a file in this Discussion forum.

Thanks in advance Sir!!!

2 Replies Last Post Oct 8, 2012, 12:14 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 7, 2012, 2:28 p.m. EDT
Hi

the FORUM does not accept all types of files, png and jpg as well as valid COMSOL mph works OK
But model files you should clear the solution and the mesh to make them far smaller, els the COMSOL servers might well explode ;)

--
Good luck
Ivar
Hi the FORUM does not accept all types of files, png and jpg as well as valid COMSOL mph works OK But model files you should clear the solution and the mesh to make them far smaller, els the COMSOL servers might well explode ;) -- Good luck Ivar

Muthuraman Chinnadurai

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 8, 2012, 12:14 a.m. EDT
Thank you sir!!!!
Thank you sir!!!!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.