Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to set different range of time for continuous simulation by time-dependent solver

Posted Jul 13, 2012, 10:14 a.m. EDT Chemical Reaction Engineering Version 3.5a 1 Reply

PT
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am using time-dependent solver for electrolysis process. Now I want to simulate it for 300 Secs. But in following manner ( i have written in syntax as we use in time stepping );

first : range(0, 0.0001, 0.001)
then in continuation second range(0.001, 0.001, 0.01),
then in continuation third range (0.01, 0.1, 10),
then in continuation forth range(10, 10, 300)

please advise me
1 Reply Last Post Jul 13, 2012, 10:25 a.m. EDT
Ceren B
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 13, 2012, 10:25 a.m. EDT
I am not sure, since I am new at Comsol, however it makes sense to add Time-dependent study steps separately under the same Study and type them in each of the steps.
it can work.
I am not sure, since I am new at Comsol, however it makes sense to add Time-dependent study steps separately under the same Study and type them in each of the steps. it can work.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content