Discussion Forum

Forum Home

New Discussion

Note: This discussion is about an older version of the COMSOL Multiphysics^® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Turbulence model in Incompressible Navier Stokes

Posted Apr 20, 2011, 4:30 a.m. EDT Computational Fluid Dynamics (CFD) Version 3.5a 2 Replies

SM Ananth

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,
I wanted to solve a turbulent pulsating flow inside a simple straight cylindrical duct. So I would like to know Comsol 3.5a uses which 'turbulence model' for the 'Incompressible Navier Stokes' module.I couldn't find any information regarding turbulent flow modeling for Incompressible Navier Stokes in the comsol manual

Thanks in advance

SM Ananth

2 Replies Last Post Apr 20, 2011, 5:19 a.m. EDT

Kai Herbrig

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi,

which module do you use? The Heat Transfer Module contains turbulent flow (incompressible and weakly compressible) and therefore information about that in the doc.

HEAT TRANSFER MODULE - Users' Guide - Version 3.5a [htug.pdf]
Turbulent Flow [P. 206]

SM Ananth

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi,
Turbulence modeling in 'Incompressible Navier Stokes' of ' Fluid dynamics module'

Thanks

SM Ananth

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Discussion Forum

Turbulence model in Incompressible Navier Stokes

Suggested Content