Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to measure the current through a wire (ex: cooper wire)

Please login with a confirmed email address before reporting spam

Hi everyone...

I've seen some discussions about this subject but i still don't get it how to do it!
First of all, i'm working with Comsol 4.0a, and the project that i'm doing its something like a heating boots. I've already created the wires and applyed 0 volts and 1 volts on the tips of the wire, now i can measure the temperature that the wire can give but i really need to see how much current it drains!
It can be measured at any point of the wire because it will be the same bahhh....
to see one example that i created its like that: img69.imageshack.us/i/comsolboots.jpg/

can please someone tell me how? Any help would be greatly appreciated.

Regards

1 Reply Last Post Mar 3, 2011, 2:27 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 3, 2011, 2:27 p.m. EST
Hi

normally in the set of variables you will find the current densities, you select the appropriate one and integrate it over the wire section somewhere along the path either with a postprocessing integration or vi an Definition - Operator integration on the selected boundary. then you call this operator in a globalequation call in the result section

--
Good luck
Ivar
Hi normally in the set of variables you will find the current densities, you select the appropriate one and integrate it over the wire section somewhere along the path either with a postprocessing integration or vi an Definition - Operator integration on the selected boundary. then you call this operator in a globalequation call in the result section -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.